Maus from Italia
Tube Rolling / Tube Expander Machine
untuk Heat Exchanger dan Boiler
Maus Made in Italia untuk Heat Exchanger dan Boiler
Tube Rolling atau Tube Expander Machine adalah proses mekanis yang digunakan dalam produksi dan pemeliharaan heat exchanger & boiler bundel tabung.
Alat ini bekerja dengan pengetatan satu elemen terhadap elemen lainnya dengan menggunakan deformasi mekanis yang dikenal sebagai ekspansi.
Pentingnya proses ini terletak pada kemampuannya untuk menghasilkan hubungan yang erat antara elemen-elemen tabung, meningkatkan efisiensi heat exchanger & boiler dan memastikan kinerja yang optimal dari sistem tersebut.
Tipe Portable Tube Rolling / Tube Expander Machine dari Maus
Portable Pneumatic Tube Rolling System
Minirol
Torque-controlled pneumatic rolling system with automatic reverse for tubes from 6,3 to 19,00 mm ( from 1/4" to 3/4" )
Portable Pneumatic Tube Rolling System
Macrol
Range of torque-controlled pneumatic tube rolling machines for tubes from 19 to 58 mm ( from 3/4" to 2.1/4" )
Portable Pneumatic Right-angle Tube Rolling System
Masterol
Range of pneumatic torque-controlled right-angle tube rolling systems for boiler tubes up to 101,6 mm ( up to 4" )
Portable Electric Equipment
Portrol 401
For the controlled rolling of tubes with external diameter from 1/2" up to 1.1/2" ( from 12,7 up to 38,1 mm )
Tipe Semi-automatic Tube Rolling / Tube Expander Machine dari Maus
Mobile Low-voltage Electric Rolling Station
Quadrol 90x
Three-phase electric rolling station for semi-automatic rolling of tubes from 3/8" to 2 ½” ( from 9.5 to 63.5 mm )
Mobile and Portable Equipment for Semi-automatic Tube Rolling
Matex
Controlled rolling of tubes from 1/4" up to 3" ( from 6,35 up to 76,20 mm ).
Hydro-mechanically Expansion System
Quadrol MRP-EH
External tubes diameter range from 12,70 to 25,40 mm ( from 1/2" to 1" )
Hydraulic Tube Rolling Machine
Hydrol 20.1
An entry-level hydraulic rolling system and is characterised by a single portable tube rolling head.
Tipe CNC Automatic Tube Rolling / Tube Expander Machine dari Maus
Automatic CNC Tube Rolling
MA - 400
The MA-400 works autonomously by following the program set using the dedicated MausCAM software
Fixed-base Single-axis CNC Work Centre
MA - 500
The MA-500 is the most innovative and efficient of Maus Italia's products for the automation of serial production assembly work cycles for small heat exchangers.
CNC Single-axis or Double-axis Work Centre with Mobile Base
MA-2501
The remarkable uniqueness of the MA-2501 is in its capacity to work simultaneously on 3 axes: horizontal, vertical and transverse.
CNC Single-axis or Double-axis Work Centre with Mobile Base
MA-3501
The MA-3501 CNC work centre allows the single TIG orbital welding and the single or double-axis performance of rolling expansions,
Tube Expander
R Series
The R Series tube expander has an adjustable depth and is designed for the rolling of tubes in heat exchangers and boilers.
